catalog > residential series

overview

Length: 143 minutes Credit: IACET, BPI Cost: $89

Learn how to master infrared thermography from John Snell, the nation's pioneer in building thermography.

Overview

Infrared thermography is an extremely valuable tool for building science professionals. Learn how to use the technology properly and ensure that you're getting the full value of its capabilities.

SPECIAL THANKS TO OUR SPONSOR:

This webinar presents infrared imaging features important for assessing residential buildings and show you how to successfully use the technology year round. See case studies showing how to use thermography to locate insulation and air leakage problems in homes. The presentation is tailored for people with a wide range of experience using thermography as well as for those who have no experience. Participants will have the opportunity to interact with John by answering challenging questions throughout the webinar.

AS A RESULT OF THIS WEBINAR YOU WILL BE ABLE TO:

• Understand the important features of imaging equipment
• Identify the conditions required for successful thermal imaging of residential buildings
• Specify how to use the technology throughout the year
• Explain how the technology is used to locate problems with insulation and air leakage in residential buildings

Who should watch?

Building performance consultants, home inspectors, HERS raters, residential builders and remodelers, weatherization professionals, residential trade contractors that own or are thinking of owning an infrared camera, building performance educators designers and architects

COURSE OUTLINE

• Introduction
• Imaging Equipment
• Industry Standards
• Conditions for success
• Interpreting what you see (or don't!)
• Basic procedure for an inspection
• Examples of what you may see
• Dealing with problems you may encounter

Credits

Energy Center University is an Authorized Provider for the International Association for Continuing Education and Training (IACET) and is committed to developing quality learning activities. You will receive .1 Continuing Education Units for viewing this webcast.

This webinar is Building Performance Institute (BPI) Recognized for 0.75 continuing education units.

To receive credit, you must complete a 10 question quiz with a minimum score of 80%. Separate registration is required for each individual requiring continuing education credit.

Cost—one rate, unlimited attendees!

This webinar is $89.

Bring your crew—gather as many people as you like in one office, conference room or auditorium and pay one low fee. You must register in advance to view this webinar. Upon registering you will receive a confirmation email that will include a link to the presentation.

If you plan to view the webinar with others at a shared location, only one registration is needed. Separate registration is required for each individual requiring continuing education credit.

Can't watch it live? All of our webinars are recorded for convenient on-demand viewing. Everyone that registers will receive access to the archived presentation.

Questions?

If you have any technical questions please visit our guidelines for viewing online courses page.

If you have any general questions or would like more information, please contact the education department at 608.210.7114 or registration@ecw.org.